# Following the online book, and running into issues

**URL:** <https://alloytools.discourse.group/t/following-the-online-book-and-running-into-issues/333>\
**Category:** Questions\
**Created:** [April 13, 2023, 2:44pm UTC](https://alloytools.discourse.group/t/following-the-online-book-and-running-into-issues/333 "2023-04-13T14:44:44Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![alexshirley](https://yyz2.discourse-cdn.com/free1/user_avatar/alloytools.discourse.group/alexshirley/32/173_2.png) [@alexshirley](https://alloytools.discourse.group/u/alexshirley)\
**Post date:** [April 13, 2023, 2:44pm UTC](https://alloytools.discourse.group/t/following-the-online-book-and-running-into-issues/333/1 "2023-04-13T14:44:44Z")

</div>

Hey All,

I’m finally picking up Alloy again, and trying to work through the online book: [Formal Software Design with Alloy 6 — Formal Software Design with Alloy 6](https://haslab.github.io/formal-software-design/index.html)

I tried run the following assertion, and was getting an interesting error:

> check restore\_after\_delete for 3 but 1… steps

and the error:

> Bounded engines do not support open bounds on steps.

I was honestly a bit surprised with this, when the expected behavior is that there should be no issues. I’m guessing something is wrong with my setup (windows + default settings) but it’s not obvious what’s wrong. Any recommendations?

---

<div class="post-metadata">

**Author:** ![alcino](https://yyz2.discourse-cdn.com/free1/user_avatar/alloytools.discourse.group/alcino/32/25_2.png) [@alcino](https://alloytools.discourse.group/u/alcino)\
**Post date:** [April 14, 2023, 8:31am UTC](https://alloytools.discourse.group/t/following-the-online-book-and-running-into-issues/333/2 "2023-04-14T08:31:59Z")

</div>

To check an assertion with `1.. steps` scope you need to select in the options menu a solver with support for unbounded model checking. Currently, only two solvers support unbounded model checking, namely `Electod/NuSMV` and `Electrod/nuXmv`, but they rely on the external model checkers `NuSMV` and `nuXmv` that do not come packaged with the Alloy Analyzer. You need to install them directly and then the Analyzer will hopefully detect them and show you those options for solvers.
